Finding Deep Silver Coins With the AT Pro
If you ‘ve ever found silver coins metal detection, you know how stimulate it is when you see that bright silver rim sticking out of the scandal hack. All of the coins and relics in my collection, including argent, were all found with the Garrett AT Pro metallic element detector.
While the AT Pro surely is n’t the best metal detector on the marketplace for depth, anyone who ‘s used it knows it ‘s a mint attraction and perfectly able of locating deep coins when used correctly at the right settings. I still believe the AT Pro metallic element detector is an excellent option for anyone newfangled to the avocation or for person wanting to upgrade to waterproof gear. Although the coil on the detector is rated for a maximum depth of 10-inches, I ‘ve made some amazing finds deeper than that, all using the stock certificate coil. Quarters and larger metallic objects still ring up at the 12-inch astuteness. Most of the older coins I find are 8 to 10-inches deep, but not always. Some coins sink deeper in the ground than others. hera are a few tips to help you find those abstruse silver coins with this detector :
Always Do Research in Advance
historical inquiry is critical for finding previous coins with any alloy detector. Go metallic element detection at sites with know natural process in the 1800s or earlier. One of the best ways to find silver coins is to get license to metal detect secret property or old forget liquid holes. You can find thick silver in honest-to-god parks besides, but it ‘s becoming very difficult to find populace places that have n’t already been picked clean .
Turn Off Iron Discrimination
The iron discrimination feature on the AT Pro works well for eliminating some rubbish signals, but setting it excessively eminent reduces coil depth. Keeping the detector in all-metal mood and using a small search coil maximizes depth and makes it easier to find deep targets. Metal detecting rubbishy ground in all-metal manner is noisy, but if you move the coil slow adequate and listen cautiously, you ‘ll hear those dim flatware high tones through all of the chatter. sometimes using this feature is the lone option if the prime is superintendent rubbishy, but do n’t turn it up to the highest total. If you use it, try 15 or 20 .
Turn Up the Sensitivity
You should constantly set the machine to the Pro mode and turn the sensitivity up to full bars whenever possible. Using full sensitivity near might lines and buried cable will result in electrical interference, but if you ‘re in the woods and away from office lines, crackpot it up full fire to find deep targets. I ‘m constantly tweaking the sensitivity when I ‘m mint hunting about erstwhile homes. I turn the sensitivity up all the way until I get chatter from electrical hindrance, then I ‘ll turn it down a notch to stabilize the machine. You should turn up the sensitivity at least one bar below the maximal dress whenever possible.
Swing the Coil Slowly and Listen
Moving the coil over the background slowly is key to finding abstruse coins with this metal detector. If prison term permits, I ‘ll search a cubic yard section by section, moving lento, listening for faint high tones. I ‘ve returned to places I ‘ve already metallic detected and recovered coins I passed up the first time. Always wear alloy detect headphones and turn the volume astir eminent adequate so you can easily hear faint tones from deeper targets. Headphones cut out background make noise and make it easier to hear those deeper targets you ‘d otherwise have a hard time listening .
Dig All Deep Targets
The AT Pro aim IDs are n’t always accurate, specially smaller objects more than 10-inches down. folderol in the ground, the depth, soil conditions, or even a mint buried on its edge can alter the target ID and the sound. If you rely entirely on the ID numbers, you ‘re going to leave a draw of old coins in the ground for person else to find. I ‘ve pulled silver medal coins out of the ground that showed a wholly different number on the blind than convention. When I hunt old sites, I dig about every signal deeper than 6-inches. This does result in more pan finds, but you wo n’t pass up that amazing argent mint or something tied better .
Metal Detect a Site Twice
Finding everything in one visit normally does n’t happen unless you ‘re searching a small area for respective hours. More times than not, you ‘ll make more finds on the second visit. I normally return to places a couple of times before writing it off. Another tip is to metal detect in different directions because some coins are buried on edge and alone ring up at certain angles .
Is the AT Pro a Good Detector for Deep Silver Coins?
I ‘ve owned my astatine Pro metallic detector now for over four years, and I ‘ve recovered hundreds of coins at diverse depths, some more than 10-inches deep. Some coins are buried 8 to 12 inches in the ground, but most of the silver coins I find are around 8 inches deep. Beyond the 8-inch depth, audio signals for silver coins, particularly dimes, become faint and hard to hear at deeper depths, but you can even find and recover them with some patience. Swinging the coil excessively debauched is one of the mistakes I made when I started out with this metal detector. Slowing down and taking your time to listen for those high tones is one of the best ways to find the concealed gems that other people have missed.
Read more : Coins of Turkey – Wikipedia
It took me some time to learn the AT Pro aim IDs, sounds, and settings, but this detector will find deep targets when used correctly. You can buy a high-end Minelab detector to maximize depth, but you ‘re going to spend thousands of dollars, which you do n’t have to do to find coins. This capacity is accurate and true to the best of the writer ’ south cognition and is not meant to substitute for conventional and personalize advice from a stipulate professional. © 2019 Matt G.